9
Figure 4
Operation
The controls are located on the
upper right of the fireplace. (Fig-
ure 4)
A. 3-Position Switch
The switch has two ON positions
marked with "
I
" and "
II
" . The
"
I
" position is for manual opera
-
tion. In this position the built-in
remote control is by-passed.
The "
II
" position is for operating
the unit with the provided remote
control.
When in the "
II
" position the unit
is operated with the ON and OFF
buttons of the remote control.
When the switch is in the center
posi
tion the unit is off.
B. Heater ON/OFF Switch
The Heater ON/OFF Switch sup-
plies power to the heater
fan and
the heater element. When the
switch is in the ON position the
heater operates if the thermostat
calls for heat.
!
NOTE:
The fan will continue
running even when the heater is
not, when the Heater Switch is in
the ON position.
C. Heater Thermostat Control
To adjust the temperature to your
individual requirements, turn the
thermostat control clockwise all
the way to turn on the heater.
When the room reaches the
desired temperature, turn the
thermostat knob counter clock-
wise until you hear a click. Leave
in this position to maintain the
room temperature at this setting.
For additional heat, turn clockwise
until you hear the click again and
the heater will turn on.
Resetting The Tempera-
ture Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
heater off and it will not come
back on without being reset. It
can be reset by switching the
3-Position Switch to OFF and
waiting 5 minutes before switch-
ing the unit back on.
CAUTION:
If you need to con-
tinuously reset the heater, unplug
the unit and call technical support
A
B
C
