11
G. Brightness
Changes the brightness of the
lights in the unit.
→ Adjusted by repeatedly press-
ing the corresponding button
on the remote.
• Indicated by the second
digit on the Floating Display™
changing to show: "H" (high),
and "L" (low).
H. Sleep Timer
The Sleep Timer can be set to
automatically shut off the fireplace
after a preset time (from 30 min-
utes to 8 hours).
→ To set the timer press the timer
button on either the remote or
the unit, repeatedly, until the
desired time is displayed.
• The On Screen Display will
display the different times as it
is adjusted. Once the timer has
begun, pressing the
button
will display the time remaining
before the unit turns Off.
!
NOTE:
The Sleep Timer can
be cancelled at any time by
pressing the
button repeat-
edly until the sleep timer displays
nothing.
Operation
and enable the heater.
!
NOTE:
When the heater has
been disabled and either the
or the
is pressed the On
Screen Display will indicate "--".
F. Color Themes
Different presets of ambient light-
ing color combinations contained
in the unit.
→ Changed by repeatedly press-
ing the corresponding button
on the remote
or the unit
.
• Cycles through the different
preset ambient lighting settings
of the unit, this includes differ-
ent combinations of colours of
the flame and media lighting (if
applicable).
!
NOTE:
The last theme (media
versions) or the second to last
theme (logset versions) of the
cycle is a prism where the unit cy-
cles through a variety of colours.
Pressing the
button stops the
cycling and holds the unit on the
preferred color, indicated by a
solid circle. When the unit is on
prism, and is cycling through the
colours, a rotating circle will be
displayed.
