9
Operation
WARNING:
This electric
firebox must be properly installed
before it is used.
The unit can be controlled by
either the manual controls which
are located on the upper right of
the fireplace or the remote (Figure
6 & 7).
The fireplace is supplied with an
IR multifunction remote control.
This remote control has a range
of approximately 16 ft (5 m). To
operate correctly, the remote con-
trol must be pointed towards the
Floating Display
TM
.
!
NOTE:
Before attempting any
operation with the remote, pull
the plastic insulator strip out from
between the remote casing and
battery cover.
A. Standby
Turns the unit On and Off.
→ Activated by pressing the
Standby button on the remote
or the unit.
• The unit will turn on with the
same functions that it was set
to when it was turned Off and
the intake temperature will be
indicated on the On Screen
Display.
!
NOTE:
When any button is
pressed the intake tempera-
ture will be displayed on the On
Screen Display for 5 seconds.
B. Flame Effects
Turns the flame effect On and Off.
→ Activated by pressing the
button on the remote.
Figure 7
Figure 6
A
C D
E
A
D
B
C
E
G
F
Floating Display
TM
H
F
