10
www.dimplex.com
On and "Waving" down will turn
the unit Off.
• The unit will turn on with the
same functions that it was set to
when it was turned Off and the in
-
take temperature will be indicated
on the On Screen Display.
!
NOTE:
When any button is
pressed the intake temperature will
be displayed on the On Screen Dis
-
play for 5 seconds.
2.
Flame On/Off
: Turns the flame
effect On or Off.
→
Activated by pressing the cor
-
responding button on the remote
or “waving” in-front of the gWa
-
ve
TM
.
• When On the flame effect is vis
-
ible in the unit.
3.
Heat On/Off
: Turns the heater
On or Off.
→
Activated by pressing the cor
-
responding button on the remote
or holding your hand in-front of
the gWave
TM
for 3 seconds.
• Indicated by the icon and intake
temperature being illuminated on
the Floating Display™ and the
heater turning On or Off.
!
NOTE:
The heater can be oper
-
ated when the flame is not visible. In
this case the icon will remain on
the Floating Display™ until the heater
Operation
is turned off or the flames are turned
back on.
4.
Temperature Down
: Decreas
-
es the heat output.
→
Adjusted by repeatedly press
-
ing the corresponding button on
the remote.*
• Indicated by setpoint tempera
-
ture on the Floating Display™
decreasing and the speed of the
fan decreasing to reduce the
amount of heat being projected
into the room.**
5.
Temperature Up
: Increases
the heat output.
→
Adjusted by repeatedly press
-
ing the corresponding button on
the remote.*
• Indicated by the setpoint on the
Floating Display™ increasing and
the speed of the fan increasing to
increase the amount of heat being
projected into the room.
*
The first time the button is pressed
the current temperature set point will
be displayed for 5 seconds.
**
The temperature can be adjusted
from 5 °C to 30 °C (41 °F to 86 °F).
!
NOTE:
Pressing the
then
will toggle between °C and °F.
6.
Eco:
Runs the heater in a
reduced wattage range when
activated.
→
Adjusted by pressing the cor
-
