background image

 

15

 

Warranty

Products to which this limited warranty 

applies

This limited warranty applies to the 

following models of your newly purchased 

Dimplex electric fireplace 690932XXXX 

and to newly purchased Dimplex fireplace 

surrounds and trims. This limited warranty 

applies only to purchases made in any 

province of Canada except for Yukon 

Territory, Nunavut, or Northwest Territories 

or in any of the 50 States of the USA (and 

the District of Columbia) except for Hawaii 

and Alaska. This limited warranty applies 

to the original purchaser of the product 

only and is not transferable.

Products excluded from this limited 

warranty

Products purchased in Yukon Territory, 

Nunavut, Northwest Territories, Hawaii, 

or Alaska are not covered by this limited 

warranty. Products purchased in these 

States, provinces, or territories are sold 

AS IS without warranty or condition of 

any kind (including, without limitation, 

any implied warranties or conditions of 

merchantability or fitness for a particular 

purpose) and the entire risk of as to the 

quality and performance of the products is 

with the purchaser, and in the event of a 

defect the purchaser assumes the entire 

cost of all necessary servicing or repair.

What this limited warranty covers and for 

how long

Products, other than fireplace surrounds 

(mantels) and trims, covered by this 

limited warranty have been tested and 

inspected prior to shipment and, subject 

to the provisions of this warranty, Dimplex 

warrants such products to be free from 

defects in material and workmanship for a 

period of 1 year from the date of the first 

purchase of such products. 

The limited 1 year warranty period also 

applies to any implied warranties that 

may exist under applicable law. Some 

jurisdictions do not allow limitations on 

how long an implied warranty lasts, so 

the above limitation may not apply to the 

purchaser.

What this limited warranty does not cover

This limited warranty does not apply to 

products that have been repaired (except 

by Dimplex or its authorized service 

representatives) or otherwise altered. This 

limited warranty does further not apply 

to defects resulting from misuse, abuse, 

accident, neglect, incorrect installation, 

improper maintenance or handling, or 

operation with an incorrect power source.

What you must do to get service under 

this limited warranty

Defects must be brought to the attention of 

Dimplex Technical Service by contacting 

Dimplex at 1-888-DIMPLEX (1-888-

346-7539), or 1367 Industrial Road, 

Cambridge Ontario, Canada N1R 7G8. 

Please have proof of purchase, catalogue/

model and serial numbers available when 

calling. Limited warranty service requires a 

proof of purchase of the product.

What Dimplex will do in the event of a 

defect?

In the event a product or part covered 

by this limited warranty is proven to be 

defective in material or workmanship 

during the 1 year limited warranty period 

you have the following rights: 
•  Dimplex will in its sole discretion 

either repair or replace such defective 

Summary of Contents for 690932XXXX


















Reviews: