10
www.dimplex.com
ranging from 10 (minutes) to
6 (hours).
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
heater off and it will not come
back on without being reset. It
can be reset by unplugging the
unit and waiting 5 minutes before
plugging the unit back in.
CAUTION:
If you need to con
-
tinuously reset the heater, unplug
the unit and call technical support
at 1-888-346-7539.
Operation
Figure 3
tings that the firebox can be oper
-
ated at will be cycled through.
60°C (99°F) → 30°C (86°F) →
28°C (82°F) → 26°C (78°F) →
24°C (75°F) → 22°C (71°F) →
"OF"
(for use without the heater)
Press and hold the down arrow
for 5 seconds to switch tempera
-
ture readout from °C and °F.
Disable Heat
If desired, depending on the sea
-
son, the heater on the unit can be
disabled. The unit will operate in
the same fashion, with remainder
of the controls.
To disable:
Press and holding the
button
on the unit for 5 seconds will
disable the heater, indicated by
the temperature display flash
-
ing.
To enable:
With the temperature displayed
(it will be flashing), press and
hold the
button on the unit
for 5 seconds to reactivate the
heating controls.
D -
Sleep Timer
This icon will light up with a
blue light when using the Timed
Shut-OFF function. A time will be
displayed on the main display
