19
Operation
Icon Function
Description
J
Heat Mode
Press the mutiple time to toggle through the heat
modes (Normal, Eco and Boost). Normal is indicated
with a Nor on the displacy, ECO is indicate by an
Eco on the display and Boost is indicate by a b20
on the display. In boost mode, a time is set initial for
20 minutes and the display will indicate b19, b18, etc
as the time counts down. This is shown by pressing
the heat mode button.
K
Temp Up
Press multiple time to raise the heater temperature in
1
°
F (1
°
C) increments. Displays current temperature;
highest temperature is 99
°
F (37
°
C). This feature is
active whenever the heat is enabled.
Change Fahrenheit
(
°
F) to Celsius (
°
C)
Press both Temp+ (
) and Temp– (
) at the same
time on the touch panel controls.
Heat Enable
Heat Disable
Hold both Heat (
) and Temp– (
) on the touch
panel controls for 2 seconds. Temperature displays on
the screen.
Hold both Heat (
) and Temp– (
) on the touch
panel controls for 2 seconds, when temperature is
adjusted "---" displays on the screen.
L
Heat
• Heat On
Press to turn heat On (indicated by 1 short beep and
the icon appearing on the display). Displays current
heater temperature setting. Use the Temp Up/Down
icon to change the heater temperature setting.
• Heat Off
Press to turn heat Off (indicated by 1 short beep).
!
NOTE:
After the heater is switched off, the fan will
continue on for 60 seconds before turning off.
Control Lock
Control Unlock
Hold both Temp– (
) and Brightness (
), on the
unit, for 2 seconds to disable the touch panel controls.
Hold both Temp– (
) and Brightness (
), on the
unit, for 2 seconds to enable the touch panel controls.
