21
Maintenance
Clean Reflector Screen
The reflector screen is cleaned in the
factory during the assembly operation.
During shipment, installation, handling,
etc., the screen may collect dust
particles; these can be removed by
dusting lightly with a clean dry cloth.
To remove fingerprints or other marks,
clean the reflector screen damp cloth.
Never use abrasive cleaners. Dry the
screen completely with a lint-free cloth
to prevent water spots.
Remote Battery Replacement
To replace the battery:
1. Push down on the battery cover
located on the back of the remote
control. Slide the battery cover
open.
2. Install a 3V (CR2032) lithium
battery in the battery holder. The
positive (+) side of the battery
faces up.
3. Close the battery cover.
The used battery must be recycled
or disposed of properly. Check
with your Local Authority or
Retailer for recycling advice in
your area.
CAUTION
:
When transporting or
storing the heater and cord, keep
in a dry place, free from excessive
vibration and store so as to avoid
damage.
