12
www.dimplex.com
Icon Function
Description
Disable Heat
On the touch panel, press the Heat and Temp
buttons at the same time and hold for 2 seconds
to disable the heater. Press and hold again for
2 seconds to enable the heater.
When the heater is disabled, "--" will display when
Temp button is pressed. The remainder of the
unit's controls will operate in the same fashion.
o
C /
o
F Temp
The display can show the temperature reading in
either
o
C or
o
F. To change the display, press and
hold the Temp and Flame Speeds buttons at the
same time on the touch panel.
D
Flame Speed
Press multiple times to toggle through flame
speeds (minimum, medium, maximum). Display
will show current speed number (F1, F2, F3
respectively).
E
Color Themes
Press multiple times to change the media and
flame base colors. This feature is active only when
the flame effect is on. Display will show theme (t0,
t1, t2, etc.)
Log unit themes:
• Theme t0 - no flame
• Theme t1 - Natural (flame base off)
• Theme t2 - Red highlights
• Theme t3 - Orange highlights
Media unit themes:
• Theme t0 - Midnight mode
• Theme t1 - Media white
• Theme t2 - Media red/orange
• Theme t3 - Media blue
• Theme t4 - Media purple
• Theme t5 - Media green
• Theme to - Prism mode (color cycle)
To choose a custom color, press
Brightness icon. Press again to
return to Prism Mode.
Operation
