9
Operation
Mode Button
Press the
Mode Button
to cycle through Heat, Timer or Flame Brightness
set mode.
Heat Set Mode
When active press
Up or Down Button
to set temperature from 59°F
(15°C) to 86°F (30°C), ON and OF. ‘ON’ means the heater operates
continuously. ‘OF’ (OFF) means only the fan will operate the heater will
be off.
! NOTE:
When the heat is turned off, the heating element will shut down
first then the fan after 20 seconds.
Changing the Temperature Unit (°F °C):
Press and hold the
Mode Button
on the fireplace for 3 seconds to change
the displayed temperature units.
! NOTE:
This function cannot be set with the remote control.
Timer Set Mode
When timer mode is activated 0.0 appears on the display and the timer
indicator light is lit yellow. Press
Up or Down Button
to set the sleep timer
by scrolling through the following:
0.0 (off), 0.5 (30 min), 1.0 (1h), 1.5, 2.0, 2.5 ...9.0.
The fireplace shuts off after the selected time period. Switching the
fireplace off with the Power Button clears any timer setting.
Flame Brightness Set Mode
When set in this mode, use the Up and Down Buttons to select from the
available 6 options: F0 (no flames), F1, F2, F3, F4 and F5 (the brightest
flames and ember bed).
