3
OPERATION
REMOTE CONTROL
(FIGURE 2)
The remote control has a range of approximately 15.25 meters (50 feet). It does not
have to be pointed at the fi replace and can pass through most obstacles (including walls).
REMOTE CONTROL INITIALIZATION
This procedure is may be required if there is a loss of power to the remote control in
the fi replace. (i.e. power failure, breaker tripped, main power switch is turned off) or
if a new remote is used.
1. Ensure that power is supplied through main service panel.
2. Locate manual controls (FIGURE 3)
3. Activate main power switch.
4. Press — (on) button located on the Manual Selection Control for 3 seconds
(FIGURE 4). All 3 indicators will fl ash.
5. Press the ON button on the transmitter (FIGURE 2). The indicators will fl ash
rapidly and then turn off. This will synchronize the remote control transmitter
and receiver.
FIGURE 2
FIGURE 3
REMOTE CONTROL USAGE
The remote control operates the fi replace levels sequentially. The level is increased every time the ON
button on the transmitter is pressed. The fi replace can be turned off at any point by pressing the OFF
button on the remote control transmitter.
Level 1:
The fl ame effect is turned on and the fi rst red indicator light is activated.
Level 2:
The fl ame effect remains on, and the Purifi re
TM
is activated. The fi rst and second red
indicator lights are activated.
Level 3:
The fl ame effect remains on, the heater is activated, and all three red indicator lights are
activated.
MANUAL CONTROLS
The fi replace can also be controlled in a similar manner to the remote control with switches located on the
fi replace (FIGURE 5).
A. On Switch
Operates fi replace in the same manner as the remote control transmitter. Pressing this button
has the same effect as the ON button on the remote control. Pressing once activates Level
1, twice activates Level 2, three times activates Level 3.
B. Off Switch
Pressing this button has the same effect as the OFF button on the remote control. Pressing once
to shut the unit off.
FIGURE 4
Manual Controls and Indicator Lights
Main Power Switch
Thermostat
Control
