13
Fireplace Installation
glass hooks (4) hang on the
front glass mounts on the
fireplace (4) (Figure 10).
use the supplied two (2)
3.
Phillips sheet metal screws
to fasten the glass assembly
tabs to the fireplace (Figure
11).
Ensure the fireplace's
4.
3-Position switch is switched
to the off position ("o").
If unit is not hard-wired, plug
5.
fireplace into a 13 Amp, 230
Volt outlet (refer to notE 1).
Figure 9
Front tray
Front glass
assembly
Figure 10
Hooks (4)
mounts (4)
Figure 11
Tab
