7
Installation
Figure 2
New Construction
1. Mark the desired location on
the floor and store the fireplace
in a safe, dry and dust free
location.
2.
Use studs to frame
an enclo-
sure with the following
mini-
mum
internal/opening dimen
-
sions (Figure 2).
!
NOTE:
An air inlet is required
for optimum mist production, see
Figure 2 for
minimum
dimen-
sions.
!
NOTE:
For optimal perfor
-
mance, 12 in. (305 mm)
mini-
mum
clearance between the in
-
stallation surface and any surface
above should be maintained.
3.
Secure unit through the two
holes in the bottom of the unit
into supports to prevent the
unit from hanging from the top
flange, see figure 3 for dimen
-
sions.
4.
The unit is equipped with a
power supply plug, the plug
should be plugged
directly into
a 15 A, 120 V outlet.
8.5 in.
(216mm)
6.7 in.
(170mm)
Exit for Cord
Installation
Surface
Supports: 0.75 in. (19 mm) high
DFI400: 15.75 in. (400mm)
DFI600: 22.05 in. (560mm)
Air Inlet
DFI400: 100cm
2
DFI600: 150cm
2
Figure 3
FRONT
1.2 in.
(30.0 mm)
3.5 in.
(90.0 mm)
3.1 in.
(80.0 mm)
4.8 in.
(122.0 mm)
5.4 in.
(137.0 mm)
1.2 in.
(30.0mm)
