9
Figure 5
Top
Cover
Transducer
Emitter
Wire Slot
Assembly
should be refilled after the
Reservoir has filled to ensure the
maximum operating time.
8.
Install the media on top,
media
tray and media (if applicable),
so that the opening is not
blocked (Figure 6).
CAUTION:
Do not arrange the
media while the unit is running,
since the media and/or tray may be
hot.
9.
Make sure the On/Off switch
is switched to Off (refer to
Operating Instruction section).
10.
Plug the unit into a 15 Amp/
120 volt outlet.
Retaining
Tab
Figure 6
!
NOTE:
Rock media shown, install
other medias in the same way.
Fan
Housing
Water Tank
