7
Do not attempt to wire your own new outlets or circuits. To reduce
the risk of fire, electric shock or injury to persons, always use a
licensed electrician.
1. Make sure the unit’s Main ON/OFF switch is switched OFF (refer
to operating instruction section).
2. Plug the unit into a 15 Amp/120 Volt outlet. If the cord does not
reach, you may use an extension cord rated for a minimum of 1875
Watts.
Operation
To access the controls, go to the back of the stove (Figure 2).
Figure 2
A
B
C
D
Back View
Front View
E
A. Main Power ON/OFF Switch
The Main Power ON/OFF Switch supplies power to all unit functions
(flame, Purifire™, and heater).
