12
www.dimplex.com
Resetting The
Temperature Cutoff
Switch
Should the heater overheat, an
automatic cut out will turn the
heater off and it will not come
back on without being reset. It
can be reset by switching Switch
1 (Figure 1) to OFF and waiting
five (5) minutes before switching
the unit back on.
CAUTION:
If you need to
continuously reset the heater,
unplug the unit and call
customer service at
1-888-346-7539.
Figure 2
On
Button
Off
Button
Battery
Cover
Battery
Operation
Remote Operation
The fireplace is supplied with an
integral ON/OFF remote control
(Figure 2).
!
NOTE:
Ensure that the
fireplace ON/OFF Switch is set
to the remote control setting
(I.E.. II).
To operate: push
ON
button
to turn fireplace on; push
OFF
button to turn fireplace off.
!
NOTE:
Remote control
operates main power supply.
Heat must still be controlled by
switches on fireplace.
Battery Replacement
To replace the battery:
①
Slide battery cover open on
the hand held transmitter
(Figure 2).
②
Correctly install one (1) 12
Volt (A23) battery in the battery
holder.
③
Close the battery cover.
www.sylvane.com 1-800-934-9194
