5
IMPORTANT SAFETY INSTRUCTIONS
⑫
All electrical heaters have
hot and arcing or sparking parts
inside. Do not use in areas where
gasoline, paint, or flammable
liquids are used or stored or
where the unit will be exposed to
flammable vapors.
⑬
Do not modify the fireplace.
Use it only as described in this
manual. Any other use not
recommended by the
manufacturer may cause fire,
electric shock or injury to persons.
⑭
To reduce the risk of electric
shock, this appliance has a
polarized plug (one blade is wider
than the other). This plug will fit
in a polarized outlet only one way.
If the plug does not fit fully in the
outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician to install the proper
outlet. Do not change the plug in
any way.
⑮
Avoid the use of an extension
cord. Extension cords may
overheat and cause a risk of fire.
If you must use an extension
cord, the cord must be No. 14
AWG minimum size and rated no
less than 1875 Watts.
⑯
Do not burn wood or other
materials in the fireplace.
⑰
Do not strike the clear door
panel.
⑱
Always use a certified
electrician should new circuits or
outlets be required.
⑲
Always use properly
grounded, fused and polarized
outlets.
⑳
Disconnect all power supply
before performing any cleaning,
maintenance or relocation of the
unit.
21
When transporting or storing
the unit and cord, keep in a
dry place, free from excessive
vibration and store so as to avoid
damage.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER
-
SERVICEABLE PARTS INSIDE
www.sylvane.com 1-800-934-9194
