7
LIGHT BULB REQUIREMENTS
Quantity of 4 clear chandelier or candelabra bulbs with an E-12 (small) socket base,
60 watt rating.
DFB4047
If unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
TO REPLACE MAIN ON/OFF AND HEATER SWITCHES
1. Open the front control cover.
2. Remove front glass by removing the 2 outer screws holding the class clips.
3. Remove the log grate by removing the 4 mounting screws.
4. Remove the log set by lifting straight up.
5. Lay the insert on its back and remove the 2 switch control cover screws located on
the bottom of the insert.
6. Locate the switch to be replaced and disconnect the wiring clips and connections
noting their original locations.
7. Depress the retainer clips on the rear of the switch and push the switch out of the
rear of the cover.
8. Reassemble in the reverse order as above.