GLASS CLEANING
The front glass is cleaned in the factory during the assembly operation. During shipment,
installation, handling, etc., the front glass may collect dust particles, these can be removed by
dusting lightly with a clean dry cloth.
To remove fingerprints or other marks, the glass can be cleaned with a damp cloth. The glass
should be completely dried with a lint free cloth to prevent water spots. To prevent scratching,
do not use abrasive cleaners or spray liquids on the glass surface.
SURFACE CLEANING
To remove fingerprints or other marks, the exterior finish can be cleaned with a damp cloth
with a mild detergent. The surface should be completely dried with a lint free cloth to prevent
water spots
.
To prevent scratching, do not use abrasive cleaners or spray liquids on any surface.
8
