background image

12  www.dimplex.com

  

Operation

 

 

Figure 4

Unlocked

Locked

Child Lock Tab

Disable Heat

If desired, depending on the sea-

son, the heater on the unit can be 

disabled. The unit will operate in 

the same fashion, with remainder 

of the controls.

To Disable

 - Press 

M

 and 

H

 at 

the same time. The tempera-

ture setting on the remote will 

no longer be visible.

!

NOTE: 

The heat will not work 

in manual controls either.

To Enable

 - Press 

I

 and 

K

 at the 

same time. The temperature 

setting will now be visible 

again.

Child Lock 

(Figure 4)

1.  Depress tab on the battery 

cover on the back of the re-

mote control and remove the 

battery cover (Figure 3).

2.  Move 

Child Lock

 tab to 

the right to lock the remote 

control.

3.  Move 

Child Lock

 tab back to 

the left to unlock the remote 

control.

4.  Replace the battery cover.

!

NOTE: 

To temporarily unlock 

the remote control press (in order) 

G

 then 

H

 then 

I

.

When the remote control’s back-

light is illuminated the 

Child Lock

 

is bypassed. When the backlight 

is off the 

Child Lock

 is re-activat-

ed.

Summary of Contents for DCF44



















Reviews: