15
Maintenance
Upper Light Bulb Requirements
Quantity of two (2) clear chande-
lier or candelabra bulbs with an
E-12 (small) socket base, 15 Watt
rating.
Do not exceed 15 Watts per
bulb
To access the upper light bulb
area (Figure 5):
CAUTION:
Allow at least five
(5) minutes for light bulbs to cool
before touching bulbs to avoid ac-
cidental burning of skin.
1. Remove front glass assembly.
2. Remove upper light cover.
3. Upper bulbs located in the
upper left and upper right cor-
ners of fireplace (Figure 5).
4. Unscrew bulbs counter clock-
wise.
5. Insert new bulbs.
6. Re-install upper light bracket.
7. Replace glass assembly.
Glass Cleaning
The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the glass may col-
lect dust particles; these can be
removed by dusting lightly with a
clean dry cloth.
To remove fingerprints or other
marks, the glass can be cleaned
with a damp cloth. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
glass surface.
Fireplace Surface Cleaning
Use a cloth dampened with warm
water only to clean painted sur-
faces of the electric fireplace. Do
not use abrasive cleaners.
