background image

 

3

   

Welcome & Congratulations

Thank you and congratulations for choosing to purchase an electric 

fireplace from Dimplex, the world leader in electric fireplaces.

Please carefully read and save these instructions.

  

CAUTION: 

 Read all instructions and warnings carefully before 

starting installation. Failure to follow these instructions may result in a 

possible electric shock, fire hazard and will void the warranty.
Please record your model and serial numbers below for future 

reference: model and serial numbers can be found on the Model and 

Serial Number Label of your fireplace.

NO NEED TO RETURN TO THE STORE

Questions with operation or assembly?  Require Parts Information?

Product Under Manufacturer’s Warranty?

Contact us at:   

 www.dimplex.com/customer_support

                    For Troubleshooting and Technical Support

 OR

         

 

Toll-Free 1-888-DIMPLEX

 (1-888-346-7539)

 

 

      Monday to Friday 8:00 a.m. to 4:30 p.m. EST

 

 

            Please have your model number and product serial  

 

 

            number ready. (See above)

S E R IAL No.

MODE L

MOD.

Summary of Contents for DCF44



















Reviews: