13
Glass Cleaning
The front glass is cleaned in the factory during the assembly operation.
During shipment, installation, handling, etc., the front glass may collect
dust particles, these can be removed by dusting lightly with a clean dry
cloth.
To remove fingerprints or other marks, the glass can be cleaned with a
damp cloth. The glass should be completely dried with a lint free cloth
to prevent water spots. To prevent scratching, do not use abrasive
cleaners or spray liquids on the glass surface
.
Surface Cleaning
To remove fingerprints or other marks, the exterior finish can be
cleaned with a damp cloth with a mild detergent. The surface should
be completely dried with a lint free cloth to prevent water spots.
To prevent scratching, do not use abrasive cleaners or spray
liquids on any surface.
Figure 9
Screw
Rear Door
Bottom of unit
