Cleaning
Over time, dust can accumulate on the grille cover and fan blades, which can affect
the fans performance. It is recommended to clean the fan at least once a month.
1. Turn the unit
OFF
and disconnect the appliance from the power supply.
2. Remove front grille
NB:
The front grille does not remove easily for safety reasons. It is held in
place by safety screws and nuts on the rim that connects front grille to
back grille.
3. Undo screw that holds the fan blade onto the motor shaft.
4. Wipe grilles and fan blades with a clean and slightly damp sponge. Once cleaned,
wipe dry with a lint free cloth.
5. Reassemble the fan following the disassembly instructions in reverse.
Do not
use abrasive sponges, scouring pads, or a stiff brush to clean the fan blades
or any part of the fan. This can damage the finish of the product.
IMPORTANT
The control panel and other parts must not come into contact with water or any
other liquids
.
Storage
If not using the unit for an extended period of time.
After cleaning please:
• Turn the unit off, unplug and take care of the mains lead & plug.
• Cover the unit and store it upright in a location where it will not receive direct sunlight.
8
Instruction Manual - 40cm HV Floor Fan DCFF40HV v1.indd 8
Instruction Manual - 40cm HV Floor Fan DCFF40HV v1.indd 8
20/09/2021 11:21:52 AM
20/09/2021 11:21:52 AM
