MIST
To activate the
MIST
function, press the
MIST
button once to turn on. Ensure there
is enough water in the water tank. The LED indicator light will illuminate once
activated. Press this button again to turn off the
MIST
function, and to use as a fan
only. The unit is also equipped with the below functions.
DISPLAY OFF
When the unit is working, after 40 seconds of any buttons being pressed, the
indicator lights will turn
OFF
. Press any button (except for the
ON/OFF
button) and
the indicator lights will reactivate.
MEMORY FUNCTION
This unit has a memory function. When the fan is turned
OFF
, it memorises the
settings previously used. When the unit is turned
ON
again, it will start in the same
settings as previously used (unless the power supply was fully disconnected). If the
unit was in
SLEEP
mode previously, it will start in natural wind mode.
AUTO OFF
If there isn't any change in settings after 15 hours of constant use, the unit will turn
OFF
automatically. This is an additional safety feature in case the unit is left
ON
accidentally.
REMOTE CONTROL
This unit comes with a remote control, and all settings can be controlled via the
remote.
Functions
9
