7
other applicable regulations to
reduce the risk of fire, electric
shock and injury to persons.
Do not attempt to wire your
own new outlets or circuits. To
reduce the risk of fire, electric
shock or injury to persons,
always use a licensed
electrician.
Installation
①
Remove all packaging from
unit and ensure heater exhaust
is free from debris and packaging
remnants.
②
Place unit on floor in desired
location.
WARNINg:
Keep combustible
materials, such as furniture,
pillows, bedding, papers,
clothes, and curtains at least
3 feet (0.9 m) from the front
of the heater and keep them
away from the sides and rear
.
③
Make sure the unit's Main On/
Off switch is switched Off (refer to
operating instruction section).
④
Plug the unit into a 15 Amp,
120 VAC outlet directly. The
Stove Installation
heater is not intended for use with
an extension cord.
