9
WARNINg:
Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
Light Bulb Replacement
Allow at least five (5) minutes for
the light bulb and heater to cool
off before touching the bulb to
avoid accidental burning of skin.
The light bulbs will need to be
replaced when the flame effect is
no longer visible. There are two
(2) bulbs under the ember bed
which generate the flames and
embers.
Light Bulb Requirements
Quantity of two (2) clear
chandelier or candelabra bulbs
with a E-12 (small) socket base,
60 Watt rating. Example GE
60BC or Philips 60 CTC
.
Do not exceed 60 Watts
Replacement:
①
Unplug the unit from power
outlet.
②
On the back of the stove,
Maintenance
remove the three (3) screws from
the light access cover (Figure 2).
Figure 2
Screw locations
Light
access
cover
Light bulbs
③
Remove the light access
cover.
④
Reach into the opening
and unscrew the bulbs counter
clockwise.
⑤
Insert new bulb(s).
⑥
Install the light access cover
and install the screws.
glass Cleaning
The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the front glass
panel may collect dust particles;
