background image

12 

 

www.dimplex.com

 Operation

Figure 9

C

A

B

The manual controls for the 

electric fireplace are located on 

the right end of the unit (Figure 9).

A.  On/Off Switch

The On/Off Switch supplies power 

to all fireplace functions. When 

the switch is in the “

I

” position, 

the unit is on. When in the “

O

” 

position, the fireplace is off.

B.  3-Position Switch

The 3-Position Switch changes 

the mode the fireplace operates 

in and has three (3) positions: 

MANUAL

”; “

OFF

”; and 

REMOTE

”.

When in “

REMOTE

” mode, 

the fireplace's three levels of 

operation are controlled by the 

ON and OFF buttons of the 

remote control.
In “

OFF

” mode, power to all 

functions is cut off.
In “

MANUAL

” mode, the 

fireplace's three levels of 

operation are controlled by the 

Manual Control Buttons.

tribute the supplied media in 

the Media tray of the firebox 

(Figure 6). 

8. 

Hang the frame assembly on 

the mounting hardware of the 

firebox and secure by follow

-

ing the instructions included 

with frame.

 

Fireplace Installation 

9.  Excess electrical cord can be 

inserted back into the bottom 

of the unit, into the cord 

storage area.

Summary of Contents for DF1135M



















Reviews: