background image

 

17

replacement is not commercially 

practicable or cannot be timely made, 

Dimplex may, in lieu of repair or 

replacement, choose to refund the 

purchase price for such product or 

part.

•   Limited warranty service will be 

performed solely by dealers or service 

agents of Dimplex authorized to 

provide limited warranty services.

•   Dimplex will not be responsible for, 

and the limited warranty services shall 

not include, any expense incurred for 

installation or removal of the product 

or part (or any replacement product or 

part) or any labour or transportation 

costs. Such costs shall be the 

purchaser’s responsibility.

What Dimplex and its dealers and service 

agents are also not responsible for:

IN NO EVENT WILL DIMPLEX, 

OR ITS 

DIRECTORS, OFFICERS, OR AGENTS, 

BE LIABLE TO the PURCHASER OR 

ANY THIRD PARTY, WHETHER IN 

CONTRACT, IN TORT, OR ON ANY 

OTHER BASIS, FOR ANY INDIRECT, 

SPECIAL, PUNITIVE, EXEMPLARY, 

CONSEQUENTIAL, OR INCIDENTAL 

LOSS, COST, OR DAMAGE ARISING 

OUT OF OR IN CONNECTION WITH 

THE SALE, MAINTENANCE, USE, OR 

INABILITY TO USE THE PRODUCT, 

EVEN IF DIMPLEX OR ITS DIRECTORS, 

OFFICERS, OR AGENTS HAVE BEEN 

ADVISED OF THE POSSIBILITY OF 

SUCH LOSSES, COSTS OR DAMAGES, 

OR IF SUCH LOSSES, COSTS, OR 

DAMAGES ARE FORESEEABLE. IN 

NO EVENT WILL DIMPLEX, 

OR ITS 

OFFICERS, DIRECTORS, OR AGENTS 

BE LIABLE FOR 

ANY

 DIRECT LOSSES, 

COSTS, OR DAMAGES THAT EXCEED 

THE PURCHASE PRICE OF THE 

PRODUCT. 
SOME JURISDICTIONS DO NOT ALLOW 

THE EXCLUSION OR LIMITATION OF 

INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION 

OR EXCLUSION MAY NOT APPLY TO 

THE PURCHASER.
How State and Provincial law apply
This limited warranty gives you specific 

legal rights, and you may also have other 

rights which vary from jurisdiction to 

jurisdiction. The provisions of the United 

Nations Convention on Contracts for 

the Sale of Goods shall not apply to this 

limited warranty or the sale of products 

covered by this limited warranty. 

 

Warranty

Summary of Contents for DF1135M



















Reviews: