16
5. Replace the log by pushing it down and in until it rests against the
mirror (Figure 14).
Upper Light Bulb Requirements
Quantity of two (2) clear chandelier or candelabra bulbs with an E-12
(small) socket base, 15 Watt rating. Please refer to the label adjacent
to the upper lamps for the correct wattage for your model.
CAUTION:
Do not exceed 25 Watts per lamp.
To replace the top light bulbs:
1. Locate the two (2) upper bulbs inside the firebox at the top.
2. Examine the bulbs to determine which bulbs require replacement.
3. Hold the socket while unscrewing the bulb.
4. Hold the socket while screwing in the new bulb.
To reassemble lamp area
1. Replace the glass and hold it in place at the top (Figure 12B).
2. Fasten retaining clip to hold glass in place (Figure 12C).
Glass Cleaning
The glass is cleaned in the factory during the assembly operation.
During shipment, installation, handling, etc., the clear door may collect
dust particles; these can be removed by dusting lightly with a clean dry
cloth.
To remove fingerprints or other marks, the clear door can be cleaned
with a damp cloth. The clear door should be completely dried with a
lint free cloth to prevent water spots.
CAUTION:
Do not use abrasive cleaners on glass surface or spray
liquids directly onto any surface.
Fireplace Surface Cleaning
Use a cloth dampened with warm water only to clean painted surfaces
of the electric fireplace. Do not use abrasive cleaners.
