background image

21

Dimplex or its authorized service representatives) or otherwise altered. This limited 

warranty does further not apply to defects resulting from misuse, abuse, accident, 

neglect, incorrect installation, improper maintenance or handling, or operation with an 

incorrect power source.

What you must do to get service under this limited warranty

Defects must be brought to the attention of Dimplex Technical Service by contacting 

Dimplex at 1-

888-

DIMPLEX (1-888-3

46-7539), or 1367 Industrial Road, cambridge 

Ontario, canada N1R 7G8.  Please have proof of purchase, catalogue/model and serial 

numbers available when calling.  Limited warranty service requires a proof of purchase 

of the product.

What Dimplex will do in the event of a defect

In the event a product or part covered by this limited warranty is proven to be defective in 

material or workmanship during (i) the 10 year limited warranty period for products other 

than fireplace surrounds (mantels) and trims, and (ii) the 1 year limited warranty period 

for surrounds (mantels) and trims, you have the following rights:  

 Limited warranty service will be performed solely by dealers or service agents of 

• 

Dimplex authorized to provide limited warranty services.

 For products (other than surrounds (mantels) and trims) for the period ending 

• 

at midnight on the first anniversary of the date of first purchase

, Dimplex will 

in its sole discretion either repair or replace such defective product or part without 

charge.  If Dimplex is unable to repair or replace such product or part, or if repair 

or replacement is not commercially practicable or cannot be timely made, Dimplex 

may, in lieu of repair or replacement, choose to refund the purchase price for such 

product or part. 

This limited warranty entitles the purchaser to on-site or in-home 

warranty services

.  Accordingly, Dimplex will be responsible for all labour and 

transportation costs associated with the repair or replacement of the product or part 

except as follows: (i) charges may be levied for travel costs incurred to travel to 

the purchaser’s site where the product is located if the purchaser’s site is beyond 

30 miles (48 km) from the closest service depot of Dimplex’s dealer or service 

agent; and (ii) the purchaser is solely responsible for providing clear access to all 

serviceable parts of the product.

 For products (other than surrounds (mantels) and trims) for the period 

• 

commencing at 12:01 a.m. on the day after the first anniversary of the first 

purchase and ending at midnight on the tenth anniversary of the date of 

first purchase

,

 

this limited warranty entitles the purchaser to replacement parts 

only without charge.  If Dimplex is unable to replace such part, or if replacement 

is not commercially practicable or cannot be timely made, Dimplex may, in lieu of 

replacement, choose to refund the purchase price for such part.  The purchaser 

shall not be entitled to on-site or in-home warranty services.  The purchaser shall 

be responsible for all expenses incurred for the removal of the part and installation 

of the replacement part including, without limitation, all shipping costs and 

transportation costs to and from the authorized dealer’s or service agent’s place of 

business and all labour costs.  Such costs shall not be the responsibility of Dimplex.

 For surrounds (mantels) and trims for the period ending at midnight on the 

• 

first anniversary of the date of first purchase, 

Dimplex will in its sole discretion 

Summary of Contents for DF3215NH























Reviews: