12
www.dimplex.com
Battery Replacement
(Figure 7)
To replace the battery:
1. Slide battery cover open on
the remote control.
2. Install one (1) 12-Volt (A23)
battery in the battery holder.
3. Close the battery cover.
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or Retailer for recycling
advice in your area.
Operation
Figure 6
Off
Button
On
Button
Battery
Battery
Cover
3. Within
10 seconds of chang
-
ing the switch position, press
the ON button located on the
remote control (Figure 6).
This will synchronize the re
-
mote control and the remote
control receiver.
!
NOTE:
You will have only 10
seconds to perform this last
step. Failure to do so will result
in these steps needing to be
followed again.
