12
www.dimplex.com
Figure 3
Log Set
Light Bulbs (2)
LED Wire Harness
(DFI2310 only)
x4
Log Grate
into firebox, some force may be
necessary to remove.
3. Disconnect the Log Set LED
Wire Harness from the unit
(DFI2310 only).
4. Unscrew the bulbs counter
clockwise.
5. Insert and install new bulbs.
6. Reconnect the Log Set
LED Wire Harness to unit
(DFI2310 only).
7. Replace the Log Set into the
insert.
8. Replace Log Grate and install
screws from step 2.
Maintenance
Glass Cleaning
The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the glass surface
may collect dust particles, these
can be removed by buffing lightly
with a clean dry cloth.
To remove fingerprints or other
marks, the glass can be cleaned
with a damp cloth using a good
quality household glass cleaner.
The glass should be completely
dried with a lint free cloth or paper
towel. Do notuse abrasive clean
-
ers on glass surface or spray
