1
2
3
4
5
6a
6b
7a
7b
Release the two red tabs by
turning them 90 degrees
Lift out the
sump nozzle
Insert lamps into lamp holders, care-
fully locating the pins into the holes
Push lamps fi rmly into place
Place the transducer
unit into the sump
Locate the tab on the transducer unit into
the moulded recess in the base of the sump
Ensure that the cable does not obstruct the Transducer Disc. To prevent the cable becoming pinched
between the nozzle and the sump, place the cable in the slot in the wall of the sump.
