10
www.dimplex.com
while turning the anchor
clockwise until it is flush with
the wall.
Insert the wall anchor screws
9.
through the wall bracket and
thread into the wall anchors.
Tighten the screw (Figure 3).
Install the remaining screws
10.
through the bracket and into
the wall studs as required.
!
NOTE:
At least two of
the mounting screws must be
installed into a wall stud.
remove the two (2) cover
11.
C.
Hold the wall-mounting
3.
bracket on the wall and mark
the location of onE (1) of the
mounting holes.
Place the bubble level onto
4.
the top of the wall-mounting
bracket.
Adjust the wall-mounting
5.
bracket so the bubble on the
level is centered between the
two black lines.
Mark three (3) other mounting
6.
screw locations, on the wall,
ensuring that the wall bracket
stays level.
Install the supplied wall
7.
anchors on the drywall
marked locations by placing
a #2 Phillips screwdriver into
the recess of the anchor.
Press the anchor into the wall
8.
in the desired marked position
Fireplace Installation
Figure 5
Wall anchor
screw
Wall
bracket
Figure 4
Figure 6
Cover Plates
