11
Fireplace Installation
Media Tray
Front Glass
Assembly
Figure 8
Figure 7
plates from the wall mounting
slots in the back of the
firebox. (Figure 5)
mount the unit on the wall,
12.
so that the tabs on the wall
bracket have been inserted
into the slots on the back of
the firebox. (Figure 6)
Carefully pour and evenly
13.
distribute the supplied glass
rock media in the media tray
of the firebox (Figure 7).
Hang the front glass as-
14.
sembly on the mounts of the
firebox and secure the glass
onto the unit by installing the
retaining screws (Figure 8)
Excess electrical cord can be
15.
inserted back into the bottom
of the unit, into the cord
storage area.
Pedestal Installation
Instructions
WARNINg:
Failure to install
the fireplace as instructed
below may result in damage
to the equipment and or may
expose the user to the risk of
fire, serious injury, illness or
death.
CAUTION:
High temperature,
keep electrical cords, drapery,
and other furnishings at least
3 feet (0.9m) from the front of
the heater and away from the
side and rear.
Tools Required
#2 Phillips screwdriver
•
Carefully lay the fireplace
1.
down on its front.
!
NOTE:
If necessary, lay a
Glass retaining
screw
