8
www.dimplex.com
Fireplace Installation
Construction and electrical
outlet wiring must comply
with local building codes and
other applicable regulations to
reduce the risk of fire, electric
shock and injury to persons.
Do not attempt to wire your
own new outlets or circuits. To
reduce the risk of fire, electric
shock or injury to persons,
always use a licensed
electrician.
WARNINg:
The supplied
mounting bracket is designed
for use with Dimplex wall
mounted fireplaces only.
Improper use, or use for
purposes other than intended,
may cause damage or injury.
Installation
WARNINg:
Failure to install
the fireplace as instructed
below may result in damage
to the equipment and or may
expose the user to the risk of
fire, serious injury, illness or
death.
WARNINg:
The fireplace
requires the wall mounting
bracket screws to be installed
into a minimum of two wall
studs (Figure 1).
Tools Required
#2 Phillips screwdriver
•
Pencil
•
slot screwdriver
•
Bubble level (supplied)
•
Drill, and drill bits as required
•
Approximate time:
30 minutes
for installation
Figure 1
Figure 2
24" - 40"
(61 cm - 102 cm)
46" - 62"
(117 cm - 158 cm)
