3
Warning: In order to avoid overheating, do not cover the appliance. Do not place material or
garments on the appliance, or obstruct the air circulation around the appliance, for instance by
curtains or furniture, as this could cause overheating and a fire risk.
The appliance carries a DO NOT COVER warning
Warning: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the utility.
Thank you for choosing a Dimplex electric fire
Dimplex PRO Chassis
Models: Engine 56 - 400 E / Engine 68 - 400 E / Engine 56 - 600 E
Only use filtered water in this appliance.
Always ensure that the appliance is sitting on a level surface.
Although this heater complies with safety standards, we do not recommend its use on deep pile carpets or
on long hair type of rugs.
Please note: Used in an environment where background noise is very low, it may be possible to hear a sound
which is related to the operation of the flame effect. This is normal and should not be a cause for concern.
If this product experiences a power surge for whatever reason the product may cut-out. This is a normal safety
feature and the product will resume operation after 30 seconds.
Once installed, never move this appliance or lay on its back, without draining the water from sump and water
tank.
If you intend not using the appliance for longer than 2 weeks, drain the water from sump and water tank and
dry the sump.
The water tank, sump, sump lid, tank cap and air filters must be cleaned once every two weeks, particularly
in hard water areas.
The appliance should never be operated if the lamps are not working.
The lamps should be regularly inspected as described under ‘Maintenance’ and ‘Changing lamps’.
The sump and the water tank in this product are treated with a biocidal product, Silver Biocide. This conforms
with the latest relevant ISO standard.
Technical Information
Model No: ENG56-400 E, ENG68-400 E, ENG56-600 E
with electronic room temperature control.
General Information
Heat Output
230V
240V
Nominal Heat Output
P
Nom
1.8
2.0
kW
Minimum Heat Output
P
min
0.9
1.0
kW
Maximum Continuous Heat Output
P
max
1.8
2.0
kW
Auxiliary Electricity Consumption
In Standby Mode
P
Nom
0.45
0.48
W
