15
Operation
Remote Control Battery
Replacement
7RUHSODFHWKH%DWWHU\
1. Slide battery cover open on the
remote control.
2. Correctly install one 3 Volt
(CR2032 [longer life] or
CR2025) Battery in the
battery holder.
3. Close the battery cover.
Battery must be recycled or
disposed of properly. Check with
your Local Authority or Retailer
for recycling advice in your area.
Maintenance
WARNING:
Disconnect power
and allow heater to cool before
attempting any maintenance or
cleaning to reduce the risk of
¿UHHOHFWULFVKRFNRUGDPDJHWR
persons.
!
NOTE:
7KH
¿UHSODFH
should not be operated with an
accumulation of dust or dirt on or in
the unit, as this can cause a build
up of heat and eventual damage.
For this reason the heater must
be inspected regularly, depending
upon conditions and at a minimum
yearly intervals.
3DUWLDOO\
5HÀHFWLYH
*ODVV
Cleaning
7KH SDUWLDOO\ UHÀHFWLYH JODVV LV
cleaned in the factory during
the assembly operation. During
shipment, installation, handling,
HWF WKH SDUWLDOO\ UHÀHFWLYH JODVV
may collect dust particles; these
can be removed by dusting lightly
with a clean dry cloth.
7R UHPRYH ¿QJHUSULQWV RU RWKHU
PDUNV WKH SDUWLDOO\ UHÀHFWLYH
glass can be cleaned with a damp
FORWK7KHSDUWLDOO\UHÀHFWLYHJODVV
should be completely dried with
a lint free cloth to prevent water
spots. To prevent scratching, do
not use abrasive cleaners.
