12
www.dimplex.com
Fireplace Installation
through the knockout on sup
-
plied alternative junction box
cover and secure with a wire
clamp (not supplied) (Figure
7)
Connect the black wire (live)
8.
from the unit to the black wire
from power supply. (Figure 7)
Connect the white wire
9.
(neutral) from the unit to the
white wire from power supply.
(Figure 7)
Connect the green wire
10.
(ground) from the unit to the
green wire from power supply.
(Figure 7)
Place all connectors inside
11.
the unit and secure the junc
-
tion box cover to unit. Ensure
that the cable clamp grips
only the jacket of service
cable.
!
NOTE:
All wiring must be
completed prior to installing the
unit into the wall.
Place unit in position in the
12.
opening, push straight in and
attach unit to studs using no.
10 fasteners. Attach supplied
wall cover brackets to the top
and the bottom of fireplace to
cover the gap on the dry wall
Figure 7
Figure 8
