17
Handles
LIFT To
rEmoVE
Figure 11
Glass
Assembly
Figure 12
Light Block
Maintenance
glass Cleaning
The front glass is cleaned in
the factory during the assembly
operation. During shipment,
installation, handling, etc., the
front glass may collect dust
particles, these can be removed
by dusting lightly with a clean dry
cloth.
To remove fingerprints or other
marks, the glass can be cleaned
with a damp cloth. The glass
should be completely dried with
a lint free cloth to prevent water
spots. To prevent scratching,
do not use abrasive cleaners or
spray liquids on the glass surface.
Fireplace Surface Cleaning
To remove fingerprints or other
marks, the exterior finish can be
cleaned with a damp cloth with
a mild detergent. The surface
should be completely dried with
a lint free cloth to prevent water
spots
.
To prevent scratching, do not
use abrasive cleaners or spray
liquids on any surface.
