Operation
User Modes:
Mode Name /Description
Action
(Actions cannot be input by remote control)
Change Celsius (
0
C) to Fahrenheit (
0
F)
Press both Temp down ( ) and Temp up ( ) on
the unit and hold until beep is heard and display
flashes. (To revert back to Celsius repeat this action)
Disable/Enable Heat Options on product only
Hold both Flame cycle ( ) and Heat Cycle ( ),
on the product, for 5 seconds, when the heater has
been disabled the product will beep. This will disable
heat control functions on the product only. To enable
heat repeat this action. Note: the remote control will
still be able to operate heat functions.
Disable/Enable Heat Options on product and re-
mote control
Hold both Heat Cycle ( ) and Temp Up ( ) on the
product for 5 seconds. When the heater has been
disabled the product will read "_ _ " and beep once.
To enable heat repeat this action.
11
