NOTE
A 15amp, 120 volt alternating current (VAC) circuit is
required. A dedicated circuit is preferred but not
essential in all cases. A dedicated circuit will be
required if, after installation, the circuit breaker trips
or fuse blows on a regular basis when the heater is
operating. Additional appliances on the same
circuit may exceed the current rating of the circuit
breaker.
WARNING
Ensure the power cord is not installed so that it is
pinched or against a sharp edge and ensure that the
power cord is stored or secured to avoid tripping or
snagging to reduce the risk of fire, electric shock or
injury to persons.
Construction and electrical outlet wiring must comply
with local building codes and other applicable
regulations to reduce the risk of fire, electric shock
and injury to persons.
Do not attempt to wire your own new outlets or
circuits. To reduce the risk of fire, electric shock or
injury to persons, always use a licensed electrician.
5
