11
CAUTION:
If you need to
continuously reset the heater,
unplug the unit and call
Dimplex north America Limited
at 1-888-346-7539. Please
have your model and serial
number ready when calling.
Remote Control
The remote control has a range
of approximately 50 feet (15.25
m), it does not have to be pointed
at the fireplace and can pass
through most obstacles (including
walls). It is supplied with 243
independent frequencies to
prevent interference with other
units.
Battery Installation
Depress tab on the battery
1.
cover on the back of the
remote transmitter and
remove battery cover.
Install two (2) AAA batteries
2.
into the remote control
(included).
Ensure Child Lock is in the
3.
“unlocked” position (Figure 3).
replace the battery cover.
4.
!
NOTE:
When the “
BAT
”
symbol is present on
the remote control it is
recommended to replace
the batteries promptly, to
maintain full functionality of the
remote/fireplace. The remote
transmitter has a battery
backup time of only several
hours.
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or retailer for recycling
advice in your area.
Remote Control Initialization/
Reprogramming
Plug cord into a 120 Volt wall
1.
outlet.
Ensure the main on/off switch
2.
located in the switch box on
the fireplace in the lower right
hand corner is in the on
position.
Set the Three Position
3.
manual Control (Figure 2B)
Operation
Figure 3
Batteries
Child Lock
