12
www.dimplex.com
Operation
to the
Remote
position (right
position).
Press and hold the
4.
Initialization Button on the unit
(Figure 2C).
While holding the Initialization
5.
Button, press the Flame/
Heat on/off button
or the
Purifire™ on/off button
on
the remote control transmitter.
Release the Initialization
6.
Button on the unit.
Press the Flame/Heat on/
7.
Off button
to turn the Flame/
Heat function on or press the
Purifire™ on/off button
to
turn the Purifire™ function on
.
Remote Control Functions
(All letter references are to Figure 4)
B. Set Temperature
Press
H
button
to turn fireplace
on. Press
J
to raise thermostat,
or
I
to lower the thermostat. Press
both
J
and
I
to change °F to °C.
C. Light Dimmer Control
While the fireplace is running,
repeatedly press the
L
or
K
button to increase or decrease
the brightness of the upper lights.
D. Flame Speed Control
While the fireplace is running,
press the
N
button to increase the
speed of the flame or press the
M
to decrease the speed of the
flame.
E. Sleep Timer
The sleep Timer automatically
shuts off the fireplace after a
preset time (from 30 minutes to 8
hours).
During fireplace operation, to
set the sleep timer press the
P
button. set the timer from 30
minutes through 8 hours. The
fireplace will automatically turn
off when the sleep timer reaches
zero (0) minutes.
The sleep timer can be cancelled
at any time by pressing the
O
button repeatedly until the sleep
timer displays nothing.
F. Purifire™
The Purifire™ includes a high
efficiency filter to help improve the
quality of air. Press the
g
button
to turn the Purifire™ function
on. When the Purifire™ function
is on, the Purifire™ symbol will
flash. When off, the symbol will
be solid.
The default setting for the
Purifire™ is set at low speed.
Press the
Q
or the
R
buttons to
change between low and high
speeds. Press the
g
button to
