5
SAVE THESE INSTRUCTIONS
cause an electric shock or fire, or
damage to the heater.
⑪
To prevent a possible fire, do
not block air intake or exhaust
in any manner. Do not use on
soft surfaces, like a bed, where
openings may become blocked.
⑫
All electrical heaters have
hot and arcing or sparking parts
inside. Do not use in areas where
gasoline, paint, or flammable
liquids are used or stored or
where the unit will be exposed to
flammable vapours.
⑬
Do not modify the fireplace.
use it only as described in
this manual. Any other use
not recommended by the
manufacturer may cause fire,
electric shock or injury to persons.
⑭
Avoid the use of an extension
cord. Extension cords may
overheat and cause a risk of fire.
If you must use an extension
cord, the cord must be no. 14
AWG minimum size and rated no
less than 1875 Watts.
⑮
Do not burn wood or other
materials in the fireplace.
⑯
Do not strike the fireplace
glass.
⑰
Always use a certified
electrician should new circuits or
outlets be required.
⑱
Always use properly grounded,
fused and polarized outlets.
⑲
Disconnect all power supply
before performing any cleaning,
maintenance or relocation of the
unit.
⑳
When transporting or storing
the unit and cord, keep in a
dry place, free from excessive
vibration and store so as to avoid
damage.
IMPORTANT INSTRUCTIONS
