•To replace the top light bulbs which illumi-
nate the log exterior:
Bulb Requirements: Quantity of 2 clear chandelier or cande-
labra bulbs with an E-12 (small) screw base. Please refer to
the label adjacent to the upper lights for the correct wattage
for your model.
CAUTION
•Do not exceed 15 watts per bulb
1. Examine the bulbs to determine if they need replacing.
(FIGURE 13)
2.
Hold the socket while unscrewing the bulb.(FIGURE
12)
3.
Hold the socket while screwing in the new bulb.
•To reassemble light bulb area
1. Replace the glass and hold it in place at top.(FIGURE 10b)
2. Fasten retaining clip to hold glass in place.(FIGURE 10c)
3. Plug in fireplace/insert.
Glass Cleaning:
The glass is cleaned in the factory during the assembly
operation. During shipment, installation, handling, etc., the
glass surface may collect dust particles; these can be re-
moved by buffing lightly with a clean dry cloth.
To remove finger prints or other marks, the glass can be
cleaned with a damp cloth using a good quality household
glass cleaner. The glass should be completely dried with a
lint free cloth or paper towel.
CAUTION
•Do not use abrasive cleaners on glass surface or spray
liquids directly onto any surface.
Helpful Hints
Wait until it is time to change the light bulbs to clean inside
glass surface.
FIGURE 13
9
