Maintenance
WARNING – BEFORE UNDERTAKING ANY MAINTENANCE OR
CLEANING, REMOVE PLUG OR DISCONNECT FROM THE
ELECTRICITY SUPPLY.
Light Emitting Diode
This fire is fitted with LED (Light Emitting Diode) bulbs in place of
conventional bulbs. These generate the same light levels as conventional
bulbs, but use a fraction of the energy consumed.
Safety cut-out
For your safety, this appliance has been fitted with a thermal cut-out. In
the event that the product overheats, the cut-out switches the heat off
automatically.
To bring the heat back into operation, remove the cause of the
overheating, then unplug or turn off the electrical supply to the heater
for up to 10 minutes.
When the heater has cooled sufficiently, re-connect and switch on the
heater.
Cleaning
Before commencing cleaning, unplug the heater and allow it to cool.
The surfaces of the heater should be given an occasional wipe over
with a dry soft cloth.
Do not use detergents, abrasive cleaning powder or polish on the metal
body of the heater.
The glass screen should be cleaned carefully with a chamois leather.
DO NOT use proprietary cleaners.
To remove any accumulation of dust or fluff the soft brush attachment of
a vacuum cleaner should occasionally be used to clean the outlet grille
of the fan heater located under the canopy.
To clean the fuel effect, remove the coal/pebbles and wash in warm
water. The plastic tray should be wiped clean with a damp cloth. When
dry replace the coal/pebbles and arrange for best effect.
Recycling
For electrical products sold within the European Community.
At the end of the electrical products useful life it should not be disposed
of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice
in your country.
Dimplex
Millbrook House
Grange Drive
Hedge End
Southampton
Hampshire. SO30 2DF
TEL: 0845 600 5111
FAX: 01489 773050
WEBSITE: www.dimplex.co.uk
Republic of Ireland
Tel.
01 8424833
[c] GDC Group Ltd,
All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Dimplex.
A division of GDC Group Ltd,
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3. These cover the essential requirements of EEC Directives
2006/95/EC and 2004/108/EC
After Sales Service
Your product is guaranteed for one year from the date of purchase.
Within this period, we undertake to repair or exchange this product free
of charge (subject to availability) provided it has been installed and
operated in accordance with these instructions.
Your rights under this guarantee are additional to your statutory rights,
which in turn are not affected by this guarantee.
Should you require after sales information or assistance with this
product please go to
www.dimplex.co.uk
where you will find our self
help guide by clicking on “After Sales” or ring our helpdesk on 0845
600 5111 (UK) or 01 842 4833 (R.O.I.) .
Please retain your receipt as proof of purchase
