21
Maintenance
WARNING:
Disconnect power
and allow heater to cool before
attempting any maintenance or
cleaning to reduce the risk of
fire, electric shock or damage
to persons.
!
NOTE:
The fireplace should not
be operated with an accumula
-
tion of dust or dirt on or in the
unit, as this can cause a build
up of heat and eventual dam-
age. For this reason the heater
must be inspected regularly,
depending upon conditions and
at least at yearly intervals.
Partially Reflective Glass
Cleaning
The partially reflective glass is
cleaned in the factory during the
assembly operation. During ship
-
ment, installation, handling, etc.,
the partially reflective glass may
collect dust particles; these can
be removed by dusting lightly with
a clean dry cloth.
To remove fingerprints or other
marks, the partially reflective
glass can be cleaned with a damp
cloth. The partially reflective glass
should be completely dried with
a lint free cloth to prevent water
spots. To prevent scratching, do
not use abrasive cleaners.
Fireplace Surface Cleaning
Use only a damp cloth to clean
painted surfaces of the fireplace.
Do not use abrasive cleaners.
Servicing
Except for installation and clean
-
ing described in this manual,
an authorized service repre
-
sentative should perform any
other servicing.
