Control Functions
The heater controls can be easily adjusted by using the six buttons
on the User Interface.
1. The
Display Screen
shows the options available at each stage of
adjustment.
2.
Menu
– displays the main options list;
Date/Time
– Set the date and time.
Mode
– Set the mode of operation.
Options
– Temperature units, daylight savings time, lock settings and
service information.
3.
Back
returns to the previous programming stage.
4. The
UP
and
DOWN
buttons are used to navigate through the menus and
alter setting values. The
Up
and
Down
button are also used to adjust the
required room temperature on the main screen. The screen colour changes
based on the temperature selected, showing deep blue through to bright
red.
5.
ENTER
is used within the menu options to confirm settings. On the main
screen pressing
Enter
will display the enabled features.
6. The timed periods during which the heater is providing heat are defined
as ‘
Comfort On
’ (this is displayed at the bottom of the screen).
Outside of heating periods the heater will not deliver heat and these
periods are called ‘
Comfort Off
‘.
While constant heat modes are active, the mode of operation is displayed
at the bottom of the screen e.g. ‘
Manual’
.
7. The
ADVANCE
button overrides the heating settings and changes the
operational state of the heater. If a timer mode is active, pressing
Advance
will cause the heater to remain ON until the next OFF period is due, or OFF
until the next ON period is due.
If the heater is in a constant mode of operation,
Advance
can be used to
switch the appliance ON and OFF.
Advance
is also used to enter
Boost
mode.
Boost
mode delivers heat
for between one and four hours.
11
